Quality and
         competency
   
 

 
 

   
 
 
 












ßíäåêñ öèòèðîâàíèÿ
28.12.2009 Merry Christmas and Happy New Year!

22.07.2005 The mine furnace for cementation PC 8.15/9,5 has been shipped
The mine furnace for cementation PC 8.15/9,5 has been produced and shipped for the enterprise of Joint-Stock Company " Soligorsk institute of resource saving problems with pilot production " (Belarus).
18.07.2005 The mine furnace PGN 6.9/7 for catalytic gas nitriding has been shipped
The furnace PGN 6.9/7 for catalytic gas nitriding has been shipped for the enterprise of Joint-Stock Company " ÀLUNEKST " (Belaya Êàlitva). One more furnace PGN 6.9/7 with CGN for the enterprise of Open Society " Energotechmash " (Zhigulevsk) is ready and it is being tested. The both furnaces will be used at nitriding extrusive matrixes.
30.06.2005 Tests of the chamber hardening-tempering agregate come to an end
Tests of the chamber hardening-tempering aggregate for the enterprise of Open Society " Factory " the Red banner " (Ryazan) come to an end. The aggregate with the productivity of up to 300 kg / hour is intended for hardening in the environment of a protective atmosphere, the subsequent washing and tempering of high-carbon steel details.
26.06.2005 The vacuum furnace for light annealing of brass tube is being designed.
We’ve received an order and now the vacuum furnace for light annealing of brass tube is being designed. The furnace can be also used for light annealing of copper wire.
21.06.2005 An article on metallographic research is published on our site
The article "Research of influence of nitrogen with metane additive on steel decarburization at thermal processing" is published on our site.
21.06.2005 Advertising booklet about furnaces for catalytic gas nitriding (version for printing)
Attention! Dear customers, the new service is available on our site. Advertising booklet about furnaces for catalytic gas nitriding in PDF format (version for printing)
15.06.2005 Furnace PVP 5000/12,5Ì for hardening of mill rolls has been shipped
In June the furnace PVP 5000/12,5Ì with weight of contraction 15 tons was shipped to the enterprise in Cherepovets. The furnace is intended for hardening of mill rolls.
10.06.2005 The conclusion about the samples of nitrided details is received
The conclusion about the samples of nitrided details of an alloy 4Õ5ÌFS on CGN technology was received from Federal State Unitary Enterprise "Central Scientific Reserch Institute of ferrous metallurgy named after P. Bardin. The white layer has made less than 10 micron. Thickness of the nitrided layer was 0,15 mm after 4 hours. Hardness on the surface was1000 HV.
13.04.2005 Sales of furnaces for chemical thermal processing increase
In April, 2005 we have shipped two furnaces for cementation PC 8.15/9,5, PC 8.12/9,5 and a furnace for catalytic gas nitriding (CGN) PGN 6.9/7. In May we plan to ship the furnace PGN 6.9/7. In June-July we will ship two furnaces for cementation such as PC 8.20/9,5 with installation of carbon potential control of atmosphere and two furnaces PGN 6.9/7 with installation for CGN.



All news



 
ELECTRIC FURNACES


 
Electric furnaces
 
Heat treatment of ferrous metals
Quenching, annealing Chamber-type furnaces Shaft-type furnaces allowing heating temperature up to 1200 °C Car-bottom furnaces Tempering Chamber-type furnaces Shaft-type furnaces Oil and water quenching baths Rinse baths Chemical heat treatment Shaft-type furnaces for carburizing and carbonitriding Chamber-type furnaces for carburizing Shaft-type furnaces for catalytic gas nitriding Chamber-type furnaces for catalytic gas nitriding Universal automated chamber furnaces with quenching bath (line) NPCS CGN MPPA Endogenerators Furnaces with protective atmosphere Motorized chamber lines Conveyor lines with protective atmosphere Quenching line based on PKM furnace Chamber furnaces with protective atmosphere (SNZ) Salt baths
 
Heat treatment of non-ferrous metals
Furnaces to heat workpieces for quenching, annealing, tempering and artificial aging Shaft-type furnaces Chamber-type furnaces Heating for stamping Water quenching baths (aluminium workpieces quenching) Melting of non-ferrous metals Fixed melting furnaces Crucible tilting melting furnaces Furnaces for artificial aging and annealing of aluminium wire Foundry molds baking Oxidation-free annealing
 
Laboratory research. Drying. Firing of ceramics.
Laboratory research Laboratory furnaces Tube furnaces Argon purification Equipment for jewelry production Heat treatment of ceramics and porcelain Chamber furnaces for firing ceramics and porcelain Car-bottom furnaces for firing ceramics and porcelain Drying chambers Drying chambers Drying chambers for electrodes baking
 
Accessories
 
Automation of heat treatment processes
PC-aided system for collection and storage of information related to technological parameters of heat treatment process Automation of the technological process Automation of the heat treatment department
 
Tailored furnaces according to the technical requirements

 
Gas heating furnaces
 
Chamber gas heating furnaces
 
Gas car-bottom furnaces
 
Gas melting furnaces

© 1992—2006 ZAO "NPK "Nakal".     All rights reserved.     Site creation, support and promotion: www.it-direct.ru